Usage Areas;

Thin-layer repair mortars, Plasters, Floor screeds, concrete repair mortars, abrasion resistant lining, and ceramic bonding mortars and wall Mortars.

Application Details

Concrete surfaces should be clean, sound and free from oil, grease, cement laitance and all loosely adhering particles. The surface should be in a saturated surface dry condition. Pre-mix Hayperflex Latex and clean water, then add cement and sand until desired consistency is achieved. Mix for at least 3 minutes until a homogeneous mixture is achieved.

Application Prohibitions

  • Avoid application in temperatures below +5°C and above +35°C.
  • Avoid application on frozen areas, on areas under risk of freezing in 24 hours or on areas open to direct sunlight or wind.