As water isolation material over concrete, masonry, woodwork, tiles, steel, also it is well suited to protect expanded polyurethane foam from deterioration by U. V. rays.
The surface should be stable, firm, dry and free from dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats.
- Avoid application in temperatures below +5°C and above +35°C.
- Avoid application on frozen areas, on areas under risk of freezing in 24 hours or on areas open to direct sunlight or wind.